KISA PHONE MANUAL
1.
Answer button
2.
End call button
3.
Contact dial buttons (5 contact configuration shown)
4.
Earpiece
5.
LED indicator
6.
Charging socket (connects to USB power cable)
7.
Microphone
8.
Lanyard anchor point
9.
Volume Up/Down button
10.
SOS button
11.
ON/OFF switch
12.
Loudspeaker
GETTING STARTED
Your KISA phone has been charged at the factory and is ready to use. To
make your first call using KISA phone:
1.
Turn the phone ON by placing the ON/OFF switch (11) to ON position. The
lights will flash, the phone will vibrate and play the “on” sound.
2.
You can now use your KISA phone to make and receive phone calls.
3.
Press on any Contact dial buttons (3) to make a call.
CHARGING YOUR KISA PHONE
ON/OFF switch (11) must be in the ON position for charging. To charge your
KISA phone, simply plug the power adapter into a power point. Connect your
KISA phone to the power adapter using the provided USB power cable.
It takes 2 hours to fully charge your KISA phone. The charge can last up to 7
days. The LED indicator will blink red if your KISA phone is charging properly.
You can use the provided charging cradle to make charging easier. When the
cradle is plugged in and has power, you will see a light on it.
MAKING AND ENDING PHONE CALLS
To make a call, simply press the Contact dial button (3). KISA phone will
flash green, vibrate and play a sound indicating a successful dial.
To end the phone call simply press the End call button
. KISA phone
flashes blue, vibrates and plays a sound to let you know that the call has
ended. Your KISA phone will go into sleep mode after 1 minute of inactivity.
To wake it up, just press any button and then press the Contact dial button
(3) to make a phone call.
RECEIVING PHONE CALLS
When there is an incoming call KISA phone will ring, vibrate and the LED (5)
will flash green. Simply press the Answer button
to answer the call.
Work Temperature:-30~50ÿ