Zeus200
Installation manual
V 1.0.7 - 12/10/2020
Page 3 of 28
1
Introduction
Read these instructions carefully at least once before installing the generator.
ATTENTION
The system must only be installed by qualified personnel
To prevent hazards during assembly, operation and circulation, scrupulously observe the information
and instructions given in this manual.
The execution of the installation procedures and the correct connections are a fundamental
prerequisite for ensuring compliance with the corresponding regulations.
This is documented by the CE mark and the declaration of conformity given in chapter 1.2.
ATTENTION
Failure to follow the assembly instructions will result in the loss of
the product warranty by the manufacturer.
1.1
Security information
1.1.1
Destination of use (intended purpose)
The Zeus200 generator has been designed for electricity production; it is able to recharge the
batteries of campers and caravans during the static use of the vehicle. Any other type of use causes
the immediate loss of legal and / or commercial warranty.
The following situations entail the loss of warranty and liability claims by the manufacturer:
•
Inappropriate assembly
•
Use of fastening systems not listed in this manual may affect the mechanical safety of the
antenna system
•
Unsuitable use
•
Modifications or interventions on the components or accessories of the kit, which lead to the
reduction of mechanical and functional safety
•
Inappropriate or forced opening of the kit components
•
Failure to observe the assembly and safety operations described in this manual
NOTE
USAGE TEMPERATURES
To ensure the operation of the unit, the ambient temperature must be between -20
o
C and
+40
o
C. Activating the system outside these values may cause malfunctions or damages.
1.1.2
Safety and correct mounting
An essential safety factor is the proper execution of assembly operations, as well as electrical and
hydraulic connections. Scrupulously observe the conditions and assembly instruction supplied in this
manual. Modifications to the electrical system in the vehicle must be carried out only by qualified
personnel. Do not make changes to the generator on your own initiative.
