Mobeye ThermoGuard TwinLog CML2255, Portal User Manual

Page: 21 / 28

20
As value the weekdays can be entered. Monday is 1, Tuesday is 2, etc. If the scheme is
valid for several days, the days can be entered in one command (e.g. 12345 means
Monday till Friday).
Example: to arm the system only during weekdays, from 6AM to 7PM, set the
TIMEARM1 to 06:00, TIMEDISARM1 to 19:00 and DAYS1 to 12345.
As default the automatic (dis) arming times are valid for all days. It is possible to assign
them to a few days in the week. In this way it is possible to have two different schemes,
which are valid on different days.
5.18 BUTTONLOCK
It can be useful to lock the on/off button to prevent the unit from being switched off
unintentionally.
In the ‘buttonlock’ mode the button is still available to get in the program
mode. As default the buttonlock is ON (so, the button is disabled). To enable the button,
the buttonlock needs to be switched to OFF.
5.19 LOW POWER MODE
A battery-powered Mobeye CML2255 has the GSM module switched off in stand-by
mode. It only switches on if it has to send a message. An externally powered unit
always keeps the GSM module open (as factory default). W
hen using the “low power
mode” an externally powered unit will also keep the GSM module closed as much as
possible, to minimize the power consumption. To achieve this, the LOWPOWER shall
be set to ON. In the low power mode, the presence of the external power source will
still be monitored.
5.20 TEST MESSAGE
The Mobeye CML2255 can send regular test messages ( keep alive ) to the Mobeye
Internet Portal, to ensure the proper functioning of the unit. The test message will also
be sent if the unit is disarmed. The Mobeye Internet Portal expects the test message
and checks the timely receipt. The monitoring of the test messages follow the
‘management by exception’ rule: only if the message was not received, the ‘service’
contacts will receive a notification.