© MOBATIME
8 / 20
800640.03
2.4 Autonomous radio controlled clocks with external DCF 77 radio receiver (FU)
Order-reference:
PLQ(B).FWU.xx
The DCF 77 radio receiver AD 192 is as normal fitted on the movement and is used for indoor mounting only.
For clocks with illumination, the external radio receiver AD 192.5 has to be used.
If the reception quality is bad, it’s recommended to use the external radio receiver too.
The radio receiver AD 192.5 is delivered with protection IP 54 and 5m cable for outdoor mounting.
Radio controlled movement FU 192 is driven with two mono cells (only for indoor use), resp. a lithium battery or
a power supply, protected against power-fail by an accumulator.
To check the reception quality, press the reset button on backside of the movement. Close the clock. The hands
are set to the 12-hour position and if the reception quality is good enough, after 5 to 10 minutes, the clock sets
on actual time. If not, repeat the procedure.
Profiline clocks with radio-controlled movements FU 192 are delivered with a separate initiation instruction.
Battery life with lithium battery (250394): 6 – 7 years.
FU 192t 200206
250394
battery lithium
BU 192t 200204
battery lithium
250394
Option AD 192.5 200897
COM 192 200045
