© MOBATIME
16 / 20
801073.10
6.
Technical data
SAM 100(t)
SEM 100(t)
Dial diameter
up to 1000 mm
Synchronization
- MOBALine (local time) (ETC, DTS, NMI...)
- DCF active bipolar
Power supply
MOBALine or DCF active
Consumption
SAM 100t < 20 mA
(at >14 VAC)
SEM 100t < 30 mA
(at >14 VAC)
Operating mode hour shaft
Continuous
Operating mode minute shaft
Minute, ½ minute or continuous (10 sec.)
Setting via MOBALine
Operating mode second shaft
-
Step-wise, continuous
with/without stop, wobbling with
stop
Setting via push-button or via
MOBALine (not supported by all
master clocks)
Setting time
Start-up: < 3 Min.
Daylight-saving time: < 2 Min.
Temperature range
-30 ... +70 °C
Weight
SAM 100: 195 g
SAM 100t: 210 g
SEM 100: 230 g
SEM 100t: 250 g
Second shaft torque
-
>50 mNm
Minute shaft torque
>20 mNm
Hour shaft torque
>20 mNm
Hand weight
Typically 70 g, max. 140 g (well-balanced)