© MOBATIME
13 / 20
801073.10
4.4
Clock ID / ID mode
With MOBALine operation, it is possible to assign an ID between 1 and 12 to each
clock. With this, the clock can be identified via NMS.
Using NMS, the clock can be set to ID mode. In this mode, the movement indicates the
clock’s current ID with the minute and (if available) second hand pointing at the
corresponding hour. The controls for setting the ID are identical to those used when
setting a hand mode.
The movement can only be returned to normal operation using NMS.
For the direct switch from no ID to ID 12 (one double click), the minute hand has to
complete one full rotation, which takes several seconds.