© MOBATIME 8/36
BE-801259.03-HN 60&61master clock
2
INSTALLATION
2.1 Installation environment
The following installation places should be avoided:
• within the reach of high-voltage operated equipment
• places exposed to direct impact of solar radiation
2.2 Installation procedure
• Snap the clock box onto the DIN rail or for rack variant into the 19" rack
cabinet
• Terminate all supply cables on the terminal box at the top of the clock box,
or on the back of the rack cabinet, respectively.
• The wall mounting case has holes for supply cables in the top and rear of
the case.
• Connect the DCF receiver (GPS antenna), slave clock line cables, switching
circuit, power cable.
• Switch-on the mains power. The current time is displayed on the Master
clock
2.3 Terminal board connection
2.3.1 DIN rail variant
Fuse
MST fuse T100 mA / 250V
L N PE
mains power input 230 VAC / 50 Hz or 115 VAC / 60Hz respectively
CH1
connection switched circuits, max. 250 V, 6 A, 1500 VA, with
possibility of programming or manual switching
+ VDC -
24 VDC output for powering other external devices (eg school bells),
can also be used as a 24 VDC power supply
+ ACCU -
14 V output for powering external devices or charging of external
battery
L1
slave line connection terminals
DCF IN
DCF input for HN 60/ HN 60i
DCF OUT
synthetic DCF output for HN 61/ HN 61i
GPS SMA connector
for GPS antenna, for HN 61/ HN 61i only
USB
USB for connecting flash memory with switching programs
LED CH1
channel status indication
LED DCF
DCF reception indication
Summary of Contents for Mini Master clock HN 60
Page 1: ...MOBATIME 1 36 BE 801259 03 HN 60 61master clock USER MANUAL Mini Master clock HN 60 HN 61...
Page 2: ...MOBATIME 2 36 BE 801259 03 HN 60 61master clock...
Page 32: ...MOBATIME 32 36 BE 801259 03 HN 60 61master clock 12 TECHNICAL PARAMETERS...
Page 36: ...MOBATIME 36 36 BE 801259 03 HN 60 61master clock...
