© MOBATIME
26 / 94
801299.00
6.5.4
Signal output analog: IRIG / 10 MHz
The DTS 4020 is equipped with 1 analog pulse / frequency output. The signals are
available on the Signal OUT3 connector.
DTS 4020.timebridge Moser-Baer AG
====================================
PULSE / FREQUENCY OUTPUT 3
1 Mode 10MHz
2 IRIG Mode
98 Return and save
99 Return and discard changes
ESC=back
Mode 0=off, 2=IRIG, 3=10MHz >
Enter desired menu number>
Path: 2 Configuration
1 Outputs
4 Signal out 3
2. Select line function:
0 = Off
1 = n/a
2 = IRIG
3 = 10MHz
4 = n/a
3. Select IRIG mode: see picture below
Selection IRIG/AFNOR mode:
DTS 4020.timebridge Moser-Baer AG
====================================
SELECTION IRIG/AFNOR CODE
* 00: off
01: IRIG-B (B122)
02 IRIG-B 12h (B122)
03 IRIG-B DIEM (B122)
04 IRIG-B123
05 AFNOR-A (NFS 87-500)
06 AFNOR-C (NFS 87-500)
07 DCF-FSK
08 IRIG-E122 DIEM
09 IRIG-B126
Enter requested audio code
ESC to leave>
Path: 2 Configuration
1 Outputs
2 Signal out 1/2/3
2 IRIG Mode
