Mobatime 122031, Mounting And Instruction Manual

Page: 49 / 124

© MOBATIME 49 / 124 801214.10
6.5.20 Alarm mask
DTS 4160.grandmaster Moser-Baer AG
====================================
ALARMMASK Page 1
[ ]=error disabled, [*]=error enabled
[*] Bit00: DTS restart [*] Bit01: System warning
[*] Bit02: Supply voltage too low [*] Bit03: Failure supply 1
[*] Bit04: Internal voltage to low [*] Bit05: Error bit5
[*] Bit06: Error bit6 [*] Bit07: Error bit7
[*] Bit08: Wrong time zone DCF [*] Bit09: Error Time Zone TC
[*] Bit10: Error bit10 [*] Bit11: Error bit11
[*] Bit12: Error bit12 [*] Bit13: Oscillator not locked
[*] Bit14: GNSS synch lost [*] Bit15: Time source big offset
Enter alarm number to alter mask
Press ENTER for next part, 99 to leave>
Path: 2 Configuration

3 Alarms

1 Alarm relay

1 Alarm mask for relay
Display of all the DTS 4160 alarms (64) on 4 pages. Pages can be scrolled through
with ENTER.
An alarm on the current page can be switched on or off by entering an error number.
The page can be exited with 99. The modifications will be saved or restored one menu
level higher in “ALARM CONFIGURATION“. All Alarms with “error bitxx“ are not yet
used.
A description of individual errors can be found in appendix "B Time zone table”
MOBA-NMS: Tab: Alarms

Alarm mask