© MOBATIME
6 / 124
BE-801203.10
1
Safety
1.1
Safety instructions
Read this chapter and the entire instruction manual carefully and follow all instructions
listed. This is your assurance for dependable operations and a long life of the device.
Keep this instruction manual in a safe place to have it handy every time you need it.
1.2
Symbols and Signal Words used in this Instruction Manual
Danger!
Please observe this safety message to avoid electrical shock!
There is danger to life!
Warning!
Please observe this safety message to avoid bodily harm and injuries!
Caution!
Please observe this safety message to avoid damages to property and devices!
Notice!
Additional information for the use of the device.
1.3
Intended Use
The
DTS 4210.timecenter
is a primary reference clock (PRC), Grandmaster and
Timeserver for the high accurate synchronization of various equipment’s and for the
use in large network environments.
It receives time information from GNSS. An intelligent time management ensures
lasting high accuracy by continuously compensating oscillator drift and aging.
With 16 network ports, it can operate as NTP server and with 12 ports as PTP
grandmaster in different networks.
The DTS 4210 provides 4 output lines for E1 / 2.048MHz, 4 IRIG/AFNOR lines
(available as analog and digital output) as well as 8 serial interfaces for the output of
time telegrams.
To maintain a redundant time source, two DTS 4210 can be linked by an optical link.
For additional functions, see the device descriptions in chapter 3.
The device is designed for 19" racks and intended to be installed in a 19" cabinet.
Operate the device only in installed condition and with all connectors plugged in.
!
!
