© MOBATIME
39 / 124
801203.10
6.5.11 Redundant operation settings
DTS 4210.timecenter Moser-Baer AG
====================================
REDUNDANT OPERATION
1 Max. offset to slave source 1000ns
2 Set master manually
98 Return and save
99 Return and discard changes
Enter desired menu number>
Path: 2 Configuration
2 Time handling
3 Redundant operation
1. Max. offset to master for triggering the alarm “Offset Source (Slave)“ (100-
2’000’000’000ns)
2. Manual change from slave to master. The command has effected immediately.
Saving with ’98’ is not required when exiting the menu.
For a description of redundant operation, see chapter “8.15 Redundant operation of 2
DTS 4210.“
6.5.12 NTP
Up to 16 multicast or broadcast addresses can be configured.
DTS 4210.timecenter Moser-Baer AG
====================================
NTP SERVER CONFIGURATION GENERAL PAGE 1/5
1 NTP Authentication
NTP slave clock line (info only)
Press enter for next part, 99 to leave
Enter desired menu number>
Path: 2 Configuration
2 Time handling
4 NTP server
Page 1.
NTP Authentication: Changes to the menu “NTP AUTHENTICATION”
Information about a multicast – address, configured for NTP slave clocks.
Page 2
Summary about configured NTP – broadcast addresses.
Select to configure.
Notice:
LAN ports share configured multicast addresses regarding the following
table:
LAN 1-4:
Multicast addresses 1-4
LAN 5-8:
Multicast addresses 5-8
LAN 9-12:
Multicast addresses 9-12
LAN 13-16: Multicast addresses 13-16
