© MOBATIME
32 / 124
801203.10
6.5.6
E1 signals
The DTS 4210 is equipped with 4 E1 Interfaces. The E1 signals are available on the
BNC (unbalanced) or on the RJ48 (balanced) connectors.
DTS 4210.timecenter Moser-Baer AG
====================================
E1 OUTPUT 1
1 Mode (0=off, 1=on) 1
2 Port unbalanced
3 Framing 1
4 CRC (0=off, 1=on) 1
98 Return and save
99 Return and discard changes
Enter desired menu number>
Path: 2 Configuration
1 Outputs
5 E1 signals
E1 out 1
1. Mode of E1 signal:
0 = off, 1 = on
2. Port:
0 = unbalanced (BNC), 1 = balanced (RJ48)
3. Framing:
0 = off, 1 = on
4. CRC:
0 = off, 1 = on
6.5.7
NTP slave clocks / time zone server
NTP slave clock line for operating slave clocks on the LAN (Ethernet). With this clock
line, a world time function can be realized.
DTS 4210.timecenter Moser-Baer AG
====================================
NTP SLAVE CLOCKS AND TIME ZONE SERVER
1 Mode(0=off 1=NTP 2=NTP+TZ 3=TZ 4=TZ poll) 0
2 Multicast address
3 Multicast port 65534
4 Pollinterval for NTP 0
5 Packet time to live (hops) 1
6 Repeat time to send TZ-tables (sec) 60
7 Delay time between packets (sec) 1
8 Configure time zone table
98 Return and save
99 Return and discard changes
Enter desired menu number>
Path: 2 Configuration
1 Outputs
5 NTP slave clocks / time zone server
1. Mode of clock line: 0 = off, 1 = Send NTP multicast, 2 = Send NTP multicast and
time zone table, 3 = Send time zone table, 4 = Time zones on request, 5 (only for
maintenance) = Send an empty time zone table and return to previous mode.
2. Multicast adress for NTP and time zone server:
239.192.54.x
Group address: x = 1-15 for MOBATIME devices, e.g. NMI, SEN 40.
