© MOBATIME
28 / 124
801203.10
6.5.2
DCF – output
The DTS 4210 is equipped with 4 DCF output lines.
These lines are available on the electrical current loop DCF outputs 1-4.
DTS 4210.timecenter Moser-Baer AG
====================================
DCF OUTPUT 1
1 Mode (0=off, 1=on) 1
2 Time zone [0] UTC
98 Return and save
99 Return and discard changes
Enter desired menu number>
Path: 2 Configuration
1 Outputs
1 DCF outputs
DCF out 1
1.
Select line function: off or DCF on
2. Select time zone
see chapter 6.5.30 Time zone selection.
6.5.3
Pulse / Frequency output / 10 MHz output
The DTS 4210 is equipped with 8 pulse / frequency interfaces. The signals are each
available on the BNC connectors Pulse and 10 MHz.
In addition, 4 of the pulse / frequency outputs are available as 1PPS on RS422 output
(Pulse Out) and current loop (Pulse Out) output.
DTS 4210.timecenter Moser-Baer AG
====================================
PULSE / FREQUENCY OUTPUT 1
1 Mode 1PPS
98 Return and save
99 Return and discard changes
ESC=back
Mode 0=off, 1=10MHz, 2=2.048MHz, 3=1PPS, 4=2Hz>
Enter desired menu number>
Path: 2 Configuration
1 Outputs
2 pulse / frequency outputs
1 pulse / frequency out 1
1. Select line function:
0 = Off
1 = 10 MHz output
2 = 2.048 MHz output
3 = 1 pulse per second
4 = 2 Hz
