© MOBATIME
25 / 124
801203.10
6.4.4
PTP information
PTP instances
DTS 4210.timecenter Moser-Baer AG
====================================
PTP INSTANCE
1 LAN2 IP1
2 LAN2 IP2
3 LAN3 IP1
4 LAN3 IP2
5 LAN4 IP1
6 LAN4 IP2
99 Return
Enter desired menu number>
Path: 1 Status
15 Info PTP
See the status of the running PTP instances. It is possible to configure two IP
addresses per LAN interface. When PTP is enabled there is a PTP instance started for
both IP addresses. Because of that every LAN interface has a submenu for each
possible IP address.
PTP Information of the instance
DTS 4210.timecenter Moser-Baer AG
====================================
PTP INFO DEVICE
LAN2 IP1
PAGE 1/3
State
MASTER
Offset to Master
0ns
PathDelay (E2E)
0ns
PathDelay (P2P)
30ns
ClockClass
6
ClockAccuracy
0x21
TimeSource
0x20
99 Return
Enter desired menu number>
Path: 1 Status
15 Info PTP
1 LAN2 IP 1
Shows the state of the PTP instance.
Possible values are Master, Slave, Faulty and Unknown
Offset to Master in Nano seconds (only in slave state)
Measured path delay (cable delay). Only in E2E mode and slave state.
Measured peer delay (cable delay). Only in P2P mode. Master and slave both measure
the peer delay.
With the clock class and the clock accuracy it is possible to see how the overall quality
of the clock is.
Time source shows what source type the device has. In this example 0x20 stands for
GPS.
