© MOBATIME
17 / 124
801203.10
6.1.3
Menu structure
DTS 4210.timecenter Moser-Baer AG
====================================
TIME SOURCE
1 Source type 1
2 Time zone of the source [0] UTC
3 Alarm delay for failure of the source 60min
4 DTS stratum (0=auto, 1-15=fix) 0
5 Stratum limit for synchalarm 12
6 Stratum TO (1-16) DCF/GPS fail 24h
7 Offset per stratum 50ms
8 Max. offset for time ok 50000us
9 Time source correction (DCF/GPS only) 0ms
Unknown command: “100”
98 Return and save
99 Return and discard changes
Enter desired menu number>
---------------AN ALARM IS ACTIVE!---------------
The current
menu is always displayed in the
menu title
. The
menu options
show all
the selectable menu functions. Provided the menu item is not a further menu, the set
parameters
are displayed. Error messages (e.g. invalid entries) or additional
information to the selected menu items are displayed in the
response line.
The
input
line
shows the current input values or options possible. The
status line
only appears,
when an information has to be displayed, e.g. "An alarm is active".
All entries must be completed with ENTER (Return) (e.g. also ESC).
The menu window can always be exited with
Ctrl-C
(incl. termination of the Telnet and
SSH connection).
The desired menu can be selected with the relevant number.
The numbers 98 and 99 are always used identically:
•
With 98, the settings entered are saved and the menu exited. Depending on the
change, the DTS 4210, or only partial functions, are rebooted.
•
With 99, all changes to the menu are reversed and the menu exited.
In the menus where data cannot be saved (command 98), the menu is only exited
with 99, but any changes are not saved.
The current menu is updated, without any further entry, with ENTER.
menu title
menu options
input line (prompt)
response line
parameters
status line
