Mobatime 121059 Mounting And Instruction Manual Download Page 114

Page: 114 / 124

114 / 124

801203.10

Copyright Notice

All rights of the software remain the property of Moser-Baer AG.

Existing software (OpenSource) with their own licences were partly used:

Designation Description

Version

License

License Description (file)

U-Boot

Boot loader

2013.04

GPL version 2

COPYING

Linux

Operating system 4.0.0

GPL version 2

COPYING

Busybox

System
environment

1.25.4

GPL version 2

LICENSE

NTP

4.2.8p6

Free

PTP4l

PTP

2.0

GPL version 2

COPYING

pure-ftp

FTP server

1.0.48

Free, partly BSD

COPYING

NetSNMP

SNMP agent

5.7.3

BSD

COPYING

OpenSSL

SSL Lib.

1.0.2g

BSD style

LICENSE

OpenSSH

SFTP server

7.9p1

BSD

LICENCE

dropbear

SSH server

2018.76

MIT style:

Free, party BSD

LICENSE

wide-dhcpv6

DHCPv6 client

20080615

Free

zlib

Compress lib.

1.2.11

Free

README

mailsend

E-mail client

1.18

GPL

The complete license descriptions can be referred to in the file indicated in the respective original
source code on the corresponding project page.

Licence text GPL, BSD and MIT:

GPL version 2: http://www.gnu.org/licenses/gpl-2.0.html

BSD:

http://www.opensource.org/licenses/bsd-license.php

MIT

http://www.opensource.org/licenses/with-license.php

The source code of the open source projects running under GPL can be requested from Moser-Baer
AG ([email protected]). Handling costs will be charged!

Summary of Contents for 121059





























































































































Search results

Summary of Contents for 121059

Reviews:

Related manuals for 121059

Brands by name

Popular brands

Mobatime 121059, Mounting And Instruction Manual

Search results

Summary of Contents for 121059

Reviews:

Related manuals for 121059

Brands by name

Popular brands