MOBA MOBA-Matic MMC-1000, User Manual

Page: 107 / 172

Operation
107
8.4.4 Controlling with the Sonic-Ski® plus for ground sensing
Manual mode will
be switched back to
with the A/M
button. The
“AUTO”
function lamp is off.
The ground mode
will be activated by
simultaneously
pressing the
UP/DOWN buttons.
The string lamp is
off.
Align the tool to the
working position for
the zero adjustment
with the UP/DOWN
buttons on the
controller or the
operator unit on the
machine.
Align Sonic-Ski to
a distance of 35
cm above the
ground (the actual
value display
must be
constantly on).
The two arrows are
irrelevant with
ground sensing.
Now press the Enter
key. In the event of
a brief press,
“SEt”
appears on the
display. The current
actual value is then
acquired as the
setpoint value.
If the button is
pressed for longer
than 1.5 seconds,
then the display will
change from
“SEt”
to
“0.0”. The actual
value and the
setpoint are now
set to zero.
Automatic mode
will be switched
back to with the
A/M button. The
function lamp
“AUTO” is on.
The controller
stops the tool on
the set value.
ca. 35cm
3) 4)
1) 2)
6b)
7)
5) 6a)
Approximately 35
cm
Ground