8
Installation Instructions
9.0
Twister Dome Switch
9.6
Included in each Twister Dome Switch Package:
Set 3M Dual Lock interlocking self-adhesive fasteners 25mm x 2mm (0.866in x 0.078in)
1 self-adhesive rubber pad 28mm x 2mm (1.102in x 0.078in)
2 Types of self-tapping screws delivered:
- Diameter 2.2mm (0.087 in)
Length 6.5mm (0.266in) for sheet thickness 0.5mm (0.02 in) to 2mm (0.079 in)
- Diameter 2.2mm (0.087 in)
Length 9.5mm ( 0.374in) for sheet thickness 3mm ( 0.118 in) to 4.5mm ( 0.177 in)
To replace the Twister button:
1.
Feed the top of the casing from the end of the Twister cord up to the base of the Twister
button. See
Figure 1
.
2.
The button should rest along the top cut-out of the casing. See
Figure 2
.
3.
Ensure the Twister cable is placed along the cable cutout area in the casing.
4.
Align the Twister holes on the top of the dome casing with the Twister button and with the
pre-drilled holes on the base of the casing.
5.
Tighten and secure the casing along the base with the four provided screws. The two inner
screws will hold the button in place. The 2 outer screws will secure the casing.
Figure 1
Figure 2
.71”
.413”
1.18”
