11
EDH0398En1011 — 09/18
IMS-LM-S Series High-Performance Long-Travel Linear Motor Stages
6.0 —
Connection to Newport Controllers
NOTE
Visit www.newport.com for compatible Newport controllers.
6.1
Operating with Newport Controllers/Drives
Newport provides detailed documentation for connecting and configuring
IMS-LM-S stages with compatible Newport controllers/drives. Newport
controllers proprietary plug-and-play ESP technology will automatically
load configuration parameters for the stage based on best factory settings
in a no load condition. These configurations can be adjusted for optimal
operation under various applications and load conditions. Refer to
documentation available on the IMS-LM-S Series Page for additional
information.
6.2
Warnings on Controllers
Controllers are intended for use by qualified personnel who recognize
shock hazards and are familiar with safety precautions required to avoid
possible injury. Read the controller user’s manual carefully before
operating the instrument and pay attention to all written warnings and
cautions.
Specifications listed in this guide are based on operation with Newport
Control and Drive Electronics. The Newport controllers with ESP
technology are delivered with a configuration file that has been developed
at the factory for operation in a no-load condition for immediate plug-and-
play operation.
WARNING
Disconnect the power plug under the following circumstances:
• If the power cord or any attached cables are frayed or damaged in
any way.
• If the power plug is damaged in any way.
• If the unit is exposed to rain, excessive moisture, or liquids are spilled
on the unit.
• If the unit has been dropped or the case is damaged.
• If you suspect service or repair is required.
• Whenever you clean the electronics unit.
CAUTION
To protect the unit from damage, be sure to:
• Keep all air vents free of dirt and dust.
• Keep all liquids away from the unit.
• Do not expose the unit to excessive moisture (85% humidity).
• Read this manual before using the unit for the first time.
