18
IDL225-LM Series
Long Travel Industrial Linear Stages
PRECAUTIONS
The IDL225-LM stage must be used or stocked in a clean environment,
without dust, humidity, solvents or other substances.
RECOMMENDATION
It is recommended to return the stage to Newport for re-lubrication after
2000 hours of use.
If the IDL225-LM stage is mounted on a workstation and cannot be easily
removed, please contact Newport's After Sales Service for further
instructions.
9.2
Repair
CAUTION
Never attempt to disassemble a component of the stage that has not
been covered in this manual.
To disassemble a non specified component can cause a malfunction of
the stage.
If you observe a malfunction in your stage, please contact us immediately
to arrange for a repair.
CAUTION
Any attempt to disassemble or repair a stage without prior
authorization will void your warranty.
9.3
Calibration
CAUTION
It is recommended to return your IDL225-LM stage to Newport once a
year for recalibration to its original specifications.
A104
4F
0 -
EDH036
1
En
10
5
0 —
0
2/
20
