MKS Granville-Phillips 358 series, Instruction Manual

Page: 51 / 122

Installation
Series 358 Micro-Ion Controller Instruction Manual - 358013 - Rev. B
51
Sy
stem C
o
mponents
Ini
tial
Setup
Installation
Before You
Begin
4.6 Mounting Configurations
Figure 4-1 illustrates the various configurations available for mounting the
controller. The standard mounting configuration is 1/2-rack mount
(358501). Other configurations are available using the mounting hardware
kits listed in Table 4-1, and shown in Figure 4-1. Contact an MKS,
Granville-Phillips Division Customer Service Representative for specail
mounting configurations. See page 4 of this instruction manual for more
information and catalog numbers.
The controller should be mounted in a location with free air flow and
ambient temperature less than 50
o
C.
Table 4-1 Installation Hardware Part Numbers
Adapter Hardware Description
Mounting Hardware
Part Number Series 358 Controller
Catalog Number
To mount the Controller only on the left side of a 19 inch rack 370010 358502
To mount the Controller in the center of 19 in. rack 370011 358503
To mount two Controllers side-by-side in a 19 in. rack 370021
To mount 1/2-rack (Standard) N/A 358501