background image

EDH0387En1020 — 09/18                                                                                                   

vi

BG Series                                                                                                                  Goniometric Cradles

Definitions and Symbols

The following terms and symbols are used in this documentation and also

appear on the product where safety-related issues occur.

General Warning or Caution

The exclamation symbol may appear in warning and caution tables in this

document. This symbol designates an area where personal injury or

damage to the equipment is possible.

The following are definitions of the Warnings, Cautions and Notes that may

be used in this manual to call attention to important information regarding

personal safety, safety and preservation of the equipment, or important

tips.

WARNING

Warning indicates a potentially dangerous situation which can result in
bodily harm or death.

CAUTION

Caution indicates a potentially hazardous situation which can result in
damage to product or equipment.

NOTE

Note indicates additional information that must be considered by the
user or operator.

European Union CE Mark

The presence of the CE Mark on Newport Corporation equipment means

that it has been designed, tested and certified as complying with all

applicable European Union (CE) regulations and recommendations.

Warnings and Cautions

ATTENTION

This stage is a Class A device. In a residential environment, this device
can cause electromagnetic interference. In this case, suitable measures
must be taken by the user.

Summary of Contents for BGM120































Reviews: