MK Martin Pulsar PTM48, Operator'S Manual, Page: 21 / 32

21
Start the Mower
For complete engine starting procedure, please see the engine owners manual. The following describes the steps
required on the MK Martin UTV Mower.
• Check engine oil level.
• Check fuel level.
• Depress the e-stop button to disengage the blades (engine will not
start if e-stop is engaged)
• Set the throttle to the ‘Choke’ position.
• Turn the key to the ‘Start’ position and release once the engine has
started.
• Run engine for a few minutes to allow it to warm up.
• Move the throttle to the ‘Fast’ position.
• Check for any bystanders, ensure you are wearing safety
equipment.
• Set the e-stop to engage the cutting blades and begin the mowing
operation.
Stop the Mower
When stopping the mower remember to always do the following:
• Depress the e-stop button to disengage the blades.
• Stop on level ground and set UTV park brake.
• Stay on the UTV until mower blades have come to a stop. (Blades
usually stop within 10 sec)
• Turn off the mower engine and remove and pocket the key.
Note : Cleaning the clippings and other yard debris from the underside
of the deck on your lawn mower after each use is critical to prevent build-up and corrosion and for smooth, even mowing.
Accumulated clippings beneath the deck can decrease the airflow needed for the mower to function efficiently.
!
DANGER
Amputation Hazard
Keep hands and feet away from mower
deck and discharge openings while ma-
chine is operating. Risk of amputation
could result.
SL00036
!
WARNING
Impact Hazard
Risk of injury from flying objects.
Stay clear of mower deck material
discharge chute. Machine can expel
objects fast enough to cause injury.
SL00037
!
WARNING
Operational Hazard
Shut off engine and remove the key
during maintenance. Risk of serious
injury or death could result
MK0002
Throttle
Ignition
switch