MK Martin Meteor 54, Operator'S Manual

Page: 20 / 40

20
Modifi ed 2 button 12 Volt Winch Control
Installation
Installing Remote Control Cable
1. Refer to page 5 in Superwinch® Owner’s Guide and note the wire to the battery. The inline
breaker is to protect the primary wires and the handle circuit. We have added an additional
breaker inside the handle to limit the power to the motor. This should be trouble free and need
minimal attention.
2. Plug one end of the Motor wire into the Motor Connector and secure the wire along the
blower top brace. Plug the other end into the Control Handle, with the handle located at a
comfortable place, ensure that the unsecured wire won’t get entangled or pinched during the
operation of the machine.
3. Depressing a button on the handle will cause the motor to turn in one direction, depressing
the other button will reverse the rotation. To switch the orientation of the buttons, reverse the
leads on the motor rather than the battery connections.
4. When unhooking the machine; unplug the motor wire form the handle. The handle can stay
wired on the tractor. In the off season you can remove it and store it in a dry place until the
next season.
Modifi ed Control handle
Wire to Motor
2 Wire Connector
Wire to Battery