manualshive.com logo in svg

MJK MagFlux, Installation And User Manual

Share
Download
MJK MagFlux Installation And User Manual Download Page 98

98

GB MagFlux Manual 0812

 

Electromagnetic Flow Meter

Modbus

The 

MagFlux

®

 is delivered with a standard Modbus RTU protocol, and up 

to four 

MagFlux

®

 converters can be connected for concurrent operation.

    Change Device Address
Device 1

   Back

Select

OK

Add Device
Change Device Address
Remove Device

   Back

Select

OK

Scanning

   Back

Modbus

Add Device

             Devices Found
Device 1

   Back

OK

Change Device Address

Change Device 1

1

   Back

Select

OK

           Remove Device
Device 1

   Back

Select

OK

 Remove Device

When several converters are to be added, it is necessary to change each 
converter device address to a unique ID address before connecting the 
converter to the Display Unit.

Add Device

Four 

MagFlux

®

 Converters can be connected to one Display Unit using 

the RS485 interface connection. Note that only one Display Unit can be 
used with several converters.
The Display Unit can easily be moved to another converters for readout 
and configuration.
1.  Select "Add Device", click OK and wait for the scan process to finish.
2.  The found converters are finally displayed.

Summary of Contents for MagFlux























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands