manualshive.com logo in svg

MJK MagFlux, Installation And User Manual

Share
Download
MJK MagFlux Installation And User Manual Download Page 116

116

GB MagFlux Manual 0812

 

Electromagnetic Flow Meter

E.  Install/Add Languages

All languages are removed during a display firmware upgrade. Conse-
quently the required languages must be re-installed at this stage.
1.  Select "File" in the menu bar and click "Languages". 
2.  A dialogue appears showing the currently installed languages (none 

following a firmware upgrade).  
You can now either add or delete the required languages.

3.  Click "Add", select the required language text file (or language pack) 

in the "MJK Field Display Unit text files" directory on the CD-ROM (for 
example 841511-000.txt) and click "Open".

4.  Select for example "European N + W" in the "Add Language" dialogue 

box (N + W = Northern and Western) and click OK.

 

         

      

5.  The languages are then transferred and loaded.  

If required, you can remove one or more languages by selecting them 
from the list, clicking "Delete" and "Close".

Summary of Contents for MagFlux























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands