![Mizuho VACB-3006B Operator'S Manual Download Page 39](http://html1.mh-extra.com/html/mizuho/vacb-3006b/vacb-3006b_operators-manual_1812837039.webp)
35
4
Operation
WARNING
- Keep your hands away from
the gap of the frame during
the operation of the table.
Otherwise you may get
injured.
NOTE
- Maximum sliding of the
tabletop is as follows.
Length
710 mm
Width
200 mm
- The tabletop slides only
when the tabletop is in the
level position. The buzzer will
sound and the tabletop won't
slide when the switch of the
hand console is pressed while
the tabletop is tilted.
■
Move lengthwise
The tabletop slides lengthwise as described below.
■
Control handle
2. Press the switch on the control handle.
3. While pressing the switch, move the control
handle to slide the tabletop laterally or
lengthwise.
Release the switch when the tabletop is at the
desired position.
The position of the tabletop will be fixed.
CAUTION
- Keep your hands away from
the guide rail under the
tabletop.
1. Make sure the tabletop is parallel to the floor.
Slide the tabletop
710 mm
Switch
Summary of Contents for VACB-3006B
