Mizuho MOT-VS600, Operator'S Manual

Page: 46 / 78

42
4
Operation
„
Move in the Foot direction
„
Move in the head direction
1. Press and simultaneously.
The tabletop will be slid in the foot direction.
1. Press and simultaneously.
The tabletop will be slid in the head direction.
NOTE
- Maximum sliding from the
center position of the tabletop
is as follows.
Foot direction 415mm
(16.34 in)
Head direction 250mm
(9.84 in)
- When sliding is operated from
the leg or head direction to
the opposite direction, it will
stop in the center position.
Once it stops, release the
switch and press it once
again; it will be slid to the
maximum range.
【 MOT-VS600DK
MOT-VS600DHK only
】
- When the head up or head
down angle of table top is 20°
or more, the table top cannot
be slid, and the buzzer will
sound.
- When the left up or right up
angle of table top is 15° or
more, the table top cannot
be slid, and the buzzer will
sound.
REV. TREND. TREND.
TILT LEFT TILT RIGHT
BACK UP BACK DOWN
TABLE UP TABLE DOWN
SLIDE HEAD
BRAKE UNLOCK
LEVEL
ENERGIZE ON/OFF
ＰＲＥＳＳ ＴＯ
ＬＯＣＫ ＢＲＡＫＥＳ
MOT-VS600DK
REFLEX FLEX
SLIDE FOOT
KIDNEY DOWN KIDNEY UP
Foot
direction
415mm
(16.34in)
250mm
(9.84in)
REV. TREND. TREND.
TILT LEFT TILT RIGHT
BACK UP BACK DOWN
TABLE UP TABLE DOWN
SLIDE HEAD
BRAKE UNLOCK
LEVEL
ENERGIZE ON/OFF
ＰＲＥＳＳ ＴＯ
ＬＯＣＫ ＢＲＡＫＥＳ
MOT-VS600DK
REFLEX FLEX
SLIDE FOOT
KIDNEY DOWN KIDNEY UP
Head
direction
Slide the tabletop