41
4
Operation
Move up the tabletop
Move down the tabletop
1. Press
and
simultaneously.
The tabletop will move up.
1. Press
and
simultaneously.
The tabletop will move down. It will stop at the
height of 620 mm (24.41 in) from the floor surface.
Once it stops, release the switch and press it
again; the tabletop will move down to the minimum
height.
CAUTION
Do not lower the table with the leg
plates folded at 90°. The tips of
the leg plates may come in contact
with the base and get damaged.
NOTE
【
MOT-VS600D/MOT-VS600DH
】
- If the Reverse Trendelenburg
(Head up) angle is 15° or
more, or the Trendelenburg
(Head down) angle is 18°
or more, or if the Lateral tilt
angle is 30° or more, then the
tabletop
cannot move down
below
a height
of 720 mm
(28.35 in) from the
floor.
- If the Trendelenburg (Head up
or down) angle is 5° or more,
or if the Lateral tilt angle is 10°
or more, then the tabletop
cannot move down below
a
height of 620 mm
(24.41 in) from the floor.
【
MOT-VS600DK/MOT-VS600DHK
】
-
-
If the Trendelenburg (Head up
or down) angle is 20° or more,
or if the Left down angle is 15°
or more, or the Right down
angle is 30° or more, then the
tabletop
cannot move down
below
a height of
720 mm
(28.35 in) from the
floor.
If the Trendelenburg (Head up
or down) angle is 5° or more,
or if the Left down angle is 10°
or more, or the Right down
angle is 15° or more, then the
tabletop
cannot move down
below
a height
of 620 mm
(24.41 in) from the
floor.
REV. TREND.
TREND.
TILT LEFT
TILT RIGHT
BACK UP
BACK DOWN
TABLE UP
TABLE DOWN
SLIDE HEAD
BRAKE UNLOCK
LEVEL
ENERGIZE
ON/OFF
PRESS TO
LOCK BRAKES
MOT-VS600DK
REFLEX
FLEX
SLIDE FOOT
KIDNEY DOWN
KIDNEY UP
Move up
REV. TREND.
TREND.
TILT LEFT
TILT RIGHT
BACK UP
BACK DOWN
TABLE UP
TABLE DOWN
SLIDE HEAD
BRAKE UNLOCK
LEVEL
ENERGIZE
ON/OFF
PRESS TO
LOCK BRAKES
MOT-VS600DK
REFLEX
FLEX
SLIDE FOOT
KIDNEY DOWN
KIDNEY UP
Move down
Maximum height
- 1060 mm (41.73 in)
(MOT-VS600DH/MOT-VS600DHK)
- 1000 mm (39.37 in)
(MOT-VS600D/MOT-VS600DK)
Minimum height
- 580 mm (22.83 in)
(MOT-VS600DH/MOT-VS600DHK)
- 520 mm (20.47 in)
(MOT-VS600D/MOT-VS600DK)
Change height of the tabletop
Summary of Contents for MOT-VS600
