Mizuho MOT-VS600, Operator'S Manual, Page: 38 / 78

Lock and unlock the operating table
34
4
Operation
„
Lock operating table
„
Unlock operating table
1. Press and simultaneously.
The brake will actuate and the operating table
will be locked and the power lamp on the base
will
turn green.The operating table will not move
up until the brake has fully actuated.
1. Press and simultaneously for one
second or more.
The brake
will be
unlocked and the operating
table
will be
released. The power lamp on the
base will turn orange, then the operating table
can be moved.
REV. TREND. TREND.
TILT LEFT
TILT RIGHT
BACK UP BACK DOWN
TABLE UP TABLE DOWN
SLIDE HEAD
BRAKE UNLOCK
LEVEL
ENERGIZE ON/OFF
ＰＲＥＳＳ ＴＯ
ＬＯＣＫ ＢＲＡＫＥＳ
MOT-VS600DK
REFLEX FLEX
SLIDE FOOT
KIDNEY DOWN KIDNEY UP
REV. TREND. TREND.
TILT LEFT
TILT RIGHT
BACK UP
BACK DOWN
TABLE UP TABLE DOWN
SLIDE HEAD
BRAKE UNLOCK
LEVEL
ENERGIZE ON/OFF
ＰＲＥＳＳ ＴＯ
ＬＯＣＫ ＢＲＡＫＥＳ
MOT-VS600DK
REFLEX FLEX
SLIDE FOOT
KIDNEY DOWN KIDNEY UP
WARNING
- Make sure the table is locked
after the brake is applied.
- Do not unlock the brake
with the patient on the table.
Otherwise the patient may
tumble off the table.
NOTE
The operating table can be
locked or unlocked once
and or are pressed.
It takes about 12 seconds for
the operating table to be locked
or for the brake to be unlocked.
If the brake is not applied, do
the following.
1) Check that the emergency
brake release handle is set to
LOCK.
2) Try applying the brake again
with the control unit or the
cordless control unit.
NOTE
Before placing the patient on
the operating table, set the
slide in the midpoint position to
fix the operating table.
LOCK