Mizuho MOT-VS600, Operator'S Manual

Page: 37 / 78

33
4
Operation
In the case of emergency
1. Press the emergency stop switch.
The buzzer sounds and the operating table
stops.
NOTE
The emergency stop switch
is located under the auxiliary
switch.
WARNING
The emergency stop switch
must be used only in an
emergency.
CAUTION
To reset the operating table
to the original position in an
emergency where, for example,
an operator's hand is caught
in a gap of the operating table,
press the switch on the control
unit to move the table toward
the reverse direction.
In an emergency, you can stop operating table from
moving by pressing the emergency stop switch.
1. After the operating table stops, turn the emergency
stop switch in the direction of the arrow or pull it
forward to cancel the emergency stop switch.
The buzzer stops sounding.
„
Operating in an emergency
„
Canceling operations