of 05
Operation & Maintenance
Ÿ
Ÿ
Turn off the power wall switch when towel warmer is not in use.
Ÿ
Clean the towel warmer with a soft dry towel.
Ÿ
This unit has been designed to run continuously if required.
Note: Only horizontal bars are to be used for heating.
After installation, connect the electric power and turn on the wall switch. The towel warmer will start to work.
Note: The surface temperature is high when towel warmer operates. PLEASE BE CAREFUL!
Caution
Voltage: 24V Rated Frequency: 90W
Ÿ
Please DO NOT connect the unit to electricity supply before completely reading and understanding the product
manual.
Ÿ
This product is intended only for domestic use and DO NOT put the product into the water or in sauna room, shower
cubicle and steam room.
Ÿ
This product is only for textile fabrics that is washed by water.
Ÿ
In order to avoid a hazard for infant or child, this appliance should be installed at the place that is at least 600mm
above floor.
Ÿ
If the wiring was damaged, it must be replaced by manufacture, service agent or qualified person to avoid electric
shock hazzard.
Ÿ
The surface temperature is high when towel is warmer is working, PLEASE BE CAREFUL!
Ÿ
For safety, please DO NOT sit, stand, lean against, hang on the product or collide in. Avoid any damage or collision on
the surface of product and influence the function or life of product.
Ÿ
Elderly, physically and mentally disabled persons should be supervised when this towel warmer is in operation.
Ÿ
If there is any problem, please turn off and contact the supplier where it was purchased. WARNING SHOCK
HAZZARD. Please do not attempt to make repairs to the electrical part of this product.
Ÿ
Please DO ensure that your hands is dry when unplugging the cord.
Page 03
