HL285201 LUPE TABLE LAMP
www.hudsonvalleylighting.com/mitzi| #mymitzi
ASSEMBLY AND MOUNTING INSTRUCTIONS
GENERAL
•
WARNING-ALWAYS UNPLUG THE LAMP TO CUT ELECTRIC
POWER OFF BEFORE INSTALLING, CLEANING, OR OTHER
MAINTENANCE.
•
FAILURE TO INSTALL FIXTURE CORRECTLY COULD RESULT IN
SERIOUS INJURY OR DEATH
•
READ ALL INSTRUCTIONS BEFORE STARTING INSTALLATION.
•
BEFORE DISCARDING THE CARTON DOUBLE CHECK THE
PACKAGING TO MAKE SURE ALL PARTS HAVE BEEN FOUND.
INSTALLATION
STEP 1.
Remove the table lamp and parts from the Carton.
STEP 2.
Install the Lamp/Bulb. This fixture is rated for 40 watt type
B lamb.
DO NOT EXCEED RECOMMENDED WATTAGE
STEP 3.
Plug cord into a qualified socket of properly rated
voltage.
STEP 4.
On/Off switch installed on cord.
CLEANING
Please clean with a soft, dry cloth ONLY! Do not use cleaning products
ASSEMBLY AND MOUNTING DIAGRAM
