8 INSPECTION AND MAINTENANCE
Mitsubishi Diesel Engine S16R & S16R2 OPERATION & MAINTENANCE MANUAL
175
Pub. No. K29001-00320 Revision: 1
Pre-cleaner - Check and Service
Check the pre-cleaner for clogging and clean it.
■
Pre-cleaner - Check for Clogging
Check the pre-cleaner for clogging.
Fig. 8-109 Pre-cleaner - Check for Clogging
■
Pre-cleaner - Clean
The following is a general procedure.
1
Release the hook-and-loop fastener
(1), and take the pre-cleaner (2) from
the silencer.
Fig. 8-110 Pre-cleaner - Remove
2
Wash the pre-cleaner by hand using
a neutral detergent.
Fig. 8-111 Pre-cleaner - Clean 1
3
Rinse the pre-cleaner with fresh
water.
• Discard the rinsed water properly.
Fig. 8-112 Pre-cleaner - Clean 2
Do not check, maintain or remove the
pre-cleaner during operation.
* Otherwise, dust or other foreign particles may
enter the engine, which could accelerate wear
of the parts or cause damage to the devices
including the turbocharger.
Take care that parts will not fall down
and get caught in the fuel control link.
* If parts are caught in the fuel control rack, the
engine will become out of control.
Make sure that the pre-cleaner is free
from clogging.
* Insufficient intake air could result in loss of
power, incomplete combustion, exhaust gas
temperature rise, and overspeed of the
turbocharger.
(2)
(1)
Summary of Contents for S16R
Page 215: ......
