OPERATIONS UNDER THE VEHICLE
PERIODIC INSPECTION AND MAINTENANCE
2-41
5. Install the filler plug and new gasket, then tighten
them to the specified torque.
Tightening torque: 37
±
11 N
⋅
m <R5MB1 and
V5MB1> or 32
±
2 N
⋅
m <R5M21>
B9. CHANGE GEAR OIL IN TRANSFER
M6020302600570
1. Remove the filler plug and gasket.
2. Remove the drain plug and gasket, and then drain
the oil.
3. Install the drain plug and new gasket, then tighten
them to the specified torque.
Tightening torque: 32
±
2 N
⋅
m
4. Fill with specified oil till the level comes to the
lower portion of oil filler plug hole.
Specified transfer oil:
MITSUBISHI MOTORS GENUINE MTF API
classification GL-3 SAE 75W-85 or
MITSUBISHI MOTORS GENUINE Multi
Gear oil API classification GL-4 SAE
75W-85
Quantity: 2.5L <Super Select 4WD>, 2.3L
<Easy Select 4WD>
5. Install the filler plug and new gasket, then tighten
them to the specified torque.
Tightening torque: 32
±
2 N
⋅
m
B10. CHECK FRONT AND REAR
DIFFERENTIAL FOR OIL LEAKAGE
(IN CASE OF LEAKAGE, CHECK THE OIL
LEVEL)
M6020301000542
CHECK OIL LEAKAGE
Check the area around the differential for oil leakage
visually or by touching it with hand.
NOTE: If an oil leakage is detected, the oil level
check is necessary.
CHECK OIL LEVEL
FRONT DIFFERENTIAL
1. Remove the under cover and filler plug.
2. Check that gear oil level is not 8 mm below the
bottom of filler plug hole.
3. If the gear oil level is lower than the lower limit,
add the specified gear oil until the level comes to
the lower portion of the filler plug hole.
Specified gear oil:
MITSUBISHI MOTORS GENUINE Super
Hypoid Gear Oil API classification GL-5 SAE
80
4. Tighten the filler plug to the specified torque.
Tightening torque: 50
±
10 N
⋅
m
AC502640AB
Filler plug
Drain plug
AC700330AM
Gasket
Transfer oil
Filler plug hole
Filler plug
AC503130AB
<Front>
<Rear>
AC505405
Gear oil
Upper
limit
Lower
limit
8 mm
AB
Summary of Contents for Pajero Sport 2013
Page 6: ...NOTES...
Page 16: ...BODY PRE DELIVERY INSPECTION 1 10...
