Mitsubishi NZ2GFCF-D62PD2, User Manual

Page: 37 / 304

35
CHAPTER 3 SPECIFICATIONS
3
3.5 List of Remote
I/O Signals
3.5
List of Remote I/O Signals
This section lists I/O signals for a master/local module.
In the example of the I/O signal assignment described in this section, the remote I/O signals of the main module are
assigned to the I/O numbers of RX0 to RX4F and RY0 to RY4F.
Remote input (RX) indicates the input signal from the high-speed counter module to the master/local module.
Remote output (RY) indicates the output signal from the master/local module to the high-speed counter module.
The remote I/O signals of the main module and extension module are assigned as shown below.
For details on the remote I/O signals, refer to the following.
Page 236, Appendix 1
Module Remote input (RX) Remote output (RY)
Main module RX0 to RX4F RY0 to RY4F
Extension module 1 RX50 to RX5F RY50 to RY5F
Module
type
Remote input signal direction: High-speed counter
module → Master/local module
Remote output signal direction: Master/local
module → High-speed counter module
Device
number
Description
Device
number
Description
Main
module
RX0 Use prohibited RY0 Use prohibited
RX1 Use prohibited RY1 Use prohibited
RX2 Use prohibited RY2 Use prohibited
RX3 Use prohibited RY3 Use prohibited
RX4 Use prohibited RY4 Use prohibited
RX5 Use prohibited RY5 Use prohibited
RX6 Use prohibited RY6 Use prohibited
RX7 Warning status flag RY7 Use prohibited
RX8 Initial data processing request flag RY8 Initial data processing completion flag
RX9 Initial data setting completion flag RY9 Initial data setting request flag
RXA Error status flag RYA Use prohibited
RXB Remote READY RYB Use prohibited
RXC Use prohibited RYC Use prohibited
RXD Use prohibited RYD Use prohibited
RXE Use prohibited RYE Use prohibited
RXF Use prohibited RYF Use prohibited
Main module Extension module 1