Mitsubishi NZ2GFCF-D62PD2, User Manual

Page: 258 / 304

256
(2) Remote registers (RWr2 to RWr3)
Address
(RWr)
Name Description Default
CH1 CH2
2
Cam switch output
signal
• When the cam switch function is selected, this area stores the comparison
result of "Cam switch function, step No.1 to No.16 setting (Output 1 to 16)" in
the remote buffer memory and CH
 Present value (RWr10 to RWr11, RWr28
to RWr29).
1) Cam switch status (Output 1)
2) Cam switch status (Output 2)
: :
15) Cam switch status (Output 15)
16) Cam switch status (Output 16)
• When Initial data setting request flag (RY9) is turned off then on, the value in
this area is cleared.
0000
H
3
Cam switch output
terminal status
• This area stores the output terminal statuses of the extension output module
assigned using the cam switch function.
1) Cam switch status (Output 1)
2) Cam switch status (Output 2)
: :
15) Cam switch status (Output 15)
16) Cam switch status (Output 16)
• When Initial data setting request flag (RY9) is turned off then on, the value in
this area is cleared.
0000
H
b15 b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 b10 b11 b12 b13 b14
9) 16) 15) 14) 13) 12) 11) 10) 1) 2) 3) 4) 5) 6) 7) 8)
0: OFF
1: ON
b15 b0 b1 b2 b3 b4 b5 b6 b7 b8 b9 b10 b11 b12 b13 b14
9) 16) 15) 14) 13) 12) 11) 10) 1) 2) 3) 4) 5) 6) 7) 8)
0: OFF
1: ON