Mitsubishi MELSEC iQ-F FX5UC, User Manual

Page: 75 / 184

5 INSTALLATION
5.5 Connecting Methods for CPU Module and Extension Devices
73
5
Connecting method C - connection of a connector conversion
module (extension connector type) or the extension power
supply module and an extension module (extension cable type)
This subsection explains how to connect the extension module (extension cable type) to the connector conversion module
(extension connector type) or the extension power supply module.
Extension connector of extension power supply module can use either extension cable type or the extension
connector type.
Precautions
Cautions on mounting and removing extension cables
• Make sure that the pullout tab of extension cables do not touch the conductive parts of the module.
• When removing the extension cable, pull the pullout tab of the extension cable straight up.
Connecting method D - connection between extension modules
(extension cable type)
This subsection explains how to connect extension modules (extension cable type).
Cautions on mounting and removing extension cables
• Make sure that the pullout tab of extension cables do not touch the conductive parts of the module.
• When removing the extension cable, pull the pullout tab of the extension cable straight up.
1.
Remove the top cover (B in the right figure) of the existing
module (left side) (A in the right figure). (Only extension power
supply module.)
2.
Connect the extension cable (C in the right figure) of the module
to be connected (right side) to the existing module (left side) (A in
the right figure).
3.
Fit the top cover (B in the right figure). (Only extension power
supply module.)
4.
Draw out the pullout tab (D in the right figure) of the extension
cable on the right side of the top cover. (Only extension power
supply module.)
1.
Remove the top cover (B in the right figure) of the existing
module (left side) (A in the right figure).
2.
Connect the extension cable (C in the right figure) of the module
to be connected (right side) to the existing module (left side) (A in
the right figure).
3.
Fit the top cover (B in the right figure).
4.
Draw out the pullout tab (D in the right figure) of the extension
cable on the right side of the top cover.
A
C
D
3 1
B
A
C
D
3 1
B