
7 APPLICATION INSTRUCTION
7.19 Clock instruction
581
7
Writing clock data
TWR(P)
This instruction writes the clock data to the built-in CPU module real time clock.
Setting data
■
Descriptions, ranges, and data types
■
Applicable devices
Processing details
• These instructions write the clock data stored in device numbers (s) to (s)+6 to the clock data area (SD210 to SD216 and
SD8013 to SD8019) of the built-in real time clock in the CPU module.
• Executing these instructions immediately changes the real time clock data. Therefore, transfer the clock data of a few
minutes ahead the current time to the clock data area (s) to (s)+6 in advance. Execute the instruction when the actual time
matches the clock data time.
• When using these instructions to set the clock data (i.e., performing time adjustment), control of special relay SM8015
(clock stop/adjustment) is not required.
• If incorrect values (i.e., values out of range) are set to the write source area, the clock data will not be updated. In this case,
correct the clock data in the write source area and execute the instruction.
• Day of the week (SD216 and SD8019) is automatically corrected.
Ladder diagram
Structured text
ENO:=TWR(EN,s);
ENO:=TWRP(EN,s);
Operand
Description
Range
Data type
Data type (label)
(s)
Head device number where the clock write source data is stored
16-bit signed binary
ANY16
Operand
Bit
Word
Double word
Indirect
specification
Constant
Others
X, Y, M, L,
SM, F, B, SB
U
\G
T, ST,
C, LC
T, ST, C, D,
W, SD, SW, R
U
\G
Z
LC
LZ
K, H
E
$
(s)
Time setting data
Special registers
Device
Item
Clock data
Device
Item
(s)
Year
1980 to 2079 (year, four digits)
SD210, SD8018
Year
(s)+1
Month
1 to 12
SD211, SD8017
Month
(s)+2
Day
1 to 31
SD212, SD8016
Day
(s)+3
Hour data
0 to 23
SD213, SD8015
Hour data
(s)+4
Minute data
0 to 59
SD214, SD8014
Minute data
(s)+5
Second data
0 to 59
SD215, SD8013
Second data
(s)+6
Day-of-the-week data
0 (Sunday) to 6 (Saturday)
SD216, SD8019
Day-of-the-week data
(s)
Summary of Contents for MELSEC iQ-F FX5 series
