Mitsubishi MELSEC-F FX2N-1RM-E-SET, User Manual

Page: 95 / 140

Program Operating Procedures 8
8-15
FX
2N
-1RM-E-SET Programmable Cam Switch
8.3.5 Setting the automatic angle advance function [FNC4, 13 to 26]
Set use of the automatic angle advance angle, the rotation speed and the angle advance
quantity.
[Power ON] [PRG mode]
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
BANK
0
OUT
0
STEP
0
DEG
F04
< Key operation > < Display >
*1 Initial value (invalid)
4 FNC
Specifying the automatic angle advance function [FNC4]
GO
GO
ON
OFF
ON LED
Exting-
uished
OFF LED
Lit*1
BANK
0
OUT
0
STEP
0
DEG
F04
ON LED
Flashes
OFF LED
Exting-
uished
When setting is finished, the contents of the
FNC5 are displayed.
While the OFF LED is lit: Invalid
While the ON LED is lit: Valid
Confirm the setting by referring
to the ON/OFF LED status.
BANK
S
OUT
Pd
STEP
0
*1
DEG
"0" is
displayed
.*2
< Key operation >
●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●●
< Display >
*1 It indicates that S0 is being set.
*2 The existing value is displayed.
1 FNC
GO
Rotation speed (rpm) of S0 [FNC13]
Set the rotation speed
(400 rpm maximum).
GO
0 5 BANK
S
OUT
Pd
STEP
0
DEG
"50"
flashes*1
When setting is finished, the contents of the next
FNC No. (FNC14) are displayed.
3
ON
OFF
Data flashes on the DEG to indicate that setting
is ready.
The contents of the previous and later FNC Nos. can
be displayed and confirmed in turn using the [+] and
[-] keys. (FNC13 to FNC26)