Mitsubishi LANCER EVOLUTION-VII 2001, Technical Information Manual

Page: 137 / 171

INTERIOR –
Interior Trims
6-8
INTERIOR TRIMS
D
The interiors are fully covered by trims to
enhance product value.
D
The adoption of the energy absorption rib mold
located in the rear of the front pillar trim and
the rear pillar trim to protect head from the
side impact and the resin materials for the trims
as unbreakable materials has increased safety
as outstanding interiors.
D
Use of inflammable materials for the trims has
increased safety as outstanding interiors. Also,
material codes are indicated to deal with
recycling easily.
CONSTRUCTION DIAGRAM
Front scuff plate
Cowl side trim
Front pillar trim
Center pillar lower trim
Center pillar upper trim
Rear pillar trim
Rear scuff plate
Partition board
Front pillar trim
(back side)
Energy absorption rib
Rear shelf trim
Retractor trim