Mitsubishi FX3U-64CCL, User Manual

Page: 33 / 78

5 Wiring, Start-up procedure
5.2 Start-up procedure
27
FX
3U
-64CCL User's Manual
1
Introduc
tion
2
Specifi
cation
and func
tion
3
Sy
stem
Configurati
on
4
Ins
tal
lation
5
W
iri
ng, S
tart-up
proced
ure
6
FX
3U
-64C
CL
settin
g (swi
tch
settin
g)
7
Buf
fer
M
emor
y
8
Program Ex
ampl
e
9
Troubl
es
hooti
ng
A
Ve
rs
ion
Inform
ation
5.2 Start-up procedure
Before wiring the CC-Link network, use the 64CCL to execute the hardware test.
Refer to the manual of the master unit for details on various procedures including data linking of the CC-Link
system.
5.2.1 64CCL summary start-up procedure
Connection to the CC-Link network with the
64CCL is possible using CC-Link dedicated cables.
Depending on the type of CC-Link dedicated
cable connected, a specific terminating resistor
is used at the end of the cable.
Start
End
Execute the hardware test of each individual
unit to confirm operations. Individual station operation check
(Hardware test)
Refer to Subsection 5.2.2
Connection of cable wiring
Refer to Section 5.3
- Confirm the input supply voltage.
- Confirm that the RUN/STOP switch of the PLC main unit is set to "STOP".
Check the following items before turning the
power ON
Check the following items before turning the
power ON.
Operation start and operation status check
Refer to Section 1.4
Confirm that each unit is installed correctly.
Switch the power supply on and confirm the
operation status and connection status using
LEDs.
Refer to Chapter 4
Install the PLC main unit, 64CCL, master
station, power adaptor and dedicated power
supply to the control panel or machine.
Installation
Refer to Chapter 3
Examine the system configuration and
network configuration.
Examination of System Configuration
Programming
Refer to Chapter 8
Refer to Chapter 6
The switch setting of 64CCL
Power ON
Set the station number, transmission rate,
number of occupied stations, expanded cyclic
transmission, etc.
Power OFF
Write a control program to the FX
3G
/FX
3U
/FX
3UC
main unit.
Operate the system.