i
FX-10GM POSITIONING CONTROLLER
FX-10GM POSITIONING CONTROLLER
USER'S GUIDE
Manual number:
JY992D68401
Manual revision:
A
Date:
September 1997
Foreword
• This manual only describes the specifications for FX-10GM positioning controller.
For complete operation, wiring, mounting and programming instructions please refer
to the FX-10GM, FX(E)-20GM HARDWARE/PROGRAMMING MANUAL, FX
PROGRAMMING MANUAL and FX SERIES HARDWARE MANUAL.
• Before attempting to install or use the FX-10GM unit this manual and FX-
10GM,FX(E)-20GM HARDWARE/PROGRAMMING MANUAL should be read and
understood.
• If in doubt at any stage of the installation of the FX-10GM unit always consult
a professional electrical engineer who is qualified and trained to the local and
national standards which apply to the installation site.
• If in doubt about the operation or use of the FX-10GM unit please consult the nearest
Mitsubisi Electric distributor.
• This manual is subject to change without notice.
