Mitsubishi F940GOT-LWD-E, Operation Manual

Page: 120 / 300

Graphic Operation Terminal F940GOT Creation of Display Screens 9
9-2
9.1 Outline of compatibility of screen data
Display screens for the F940GOT can be created using either the software for DU or the soft-
ware for GOT-A900. The differences between these two are shown below.
a) Functions dedicated to the screen creation software for DU (Refer to Paragraph 9.1.1.)
These functions of the F940GOT are supported by only the screen creation software for
DU.
These functions cannot be read nor written using the screen creation software for GOT-
A900.
b) Common functions (Refer to Paragraph 9.1.2.)
These functions are supported by both the screen creation software for DU and the
screen creation software for GOT-A900.
However, some function names are different and some functions are restricted in each
software. Refer to "9.1.2 Common functions".
c) Functions dedicated to the screen creation software for GOT-A900 (Refer to Paragraph
9.1.3.)
These functions are supported by only the screen creation software for GOT-A900. They
are not supported by the F940GOT nor the screen creation software for DU.
Screen creation software for DU
(FX-PCS-DU/WIN-E)
F940GOT
Screen creation software for GOT-
A900 (SW1D5C-GOTRE-PACK)
a)
Functions
dedicated to DU
Indicator,
Overlay Screen,
Buzzer,
Data Setting and
Send Data Bank
External
character
Sampling
condition setting
Time switch
Device comment
b)
Common
functions
Common area
c)
Functions
dedicated to
A900
Line Freeform, Polygon, Sector, Arc,
Scale and Paint
Data List, Level and Part Movement
Report
Hard copy
Voice
Debug
Window screen and station No.
changeover