Mitsubishi AJ65SBT-64AD, User Manual

Page: 52 / 72

5 - 11
MELSEC-A
5 PROGRAMMING
5.5 Program Example for Use of the ACPU/QCPU (A mode) (dedicated instructions)
A sequence program is used to set the network and automatic refresh parameters.
(1) Program example
Setting of network parameters using RLPA dedicated instruction
Setting of automatic refresh parameters using RRPA dedicated instruction
Synchronization mode invalid
Number of connected
modules:1
AJ65SBT-64AD station
information (remote device
station, 1 station occupied,
station No. 1)
Dedicated instruction (RLPA)
Starting I/O number of master
module
Parameter storage starting
device
Device which turns on 1 scan
at completion
Reads parameter status at
abnormal completion.
Sets RX starting number.
Sets "X".
Sets X400.
Sets RY starting number.
Sets 32 points.
Sets "Y".
Sets Y400.
Sets 32 points.
Sets RW starting number.
Sets "D".
Sets D200.