Mitsubishi A2USCPU(S1), User Manual

Page: 251 / 272

App - 56
APPENDIX
Appendix4.5 Microcomputer program
Since the A2USHCPU-S1, A2USCPU(S1) and A2ASCPU(S1/S30) do not have the
microcomputer mode, the utility software packages and user-created microcomputer
programs used for the A1SHCPU and A2SHCPU are not available. (The microcomputer
program area for A2USHCPU-S1, A2USCPU(S1) and A2ASCPU(S1/S30) is dedicated for
the SFC.)
When the utility software packages or the microcomputer programs above are used,
delete all of the SUB instructions (microcomputer program call) used for executing them
from the sequence program.
When the following utility packages are used, modify the program using the
A2USHCPU-S1, A2USCPU(S1) and A2ASCPU(S1/S30) dedicated instructions.
1) SW -AD57P ......................................AnACPU/AnUCPU Programming Manual
(Usable for creating the canvas and
character generators. (AD57) IB-66257
2) SW -UTLP-FNO
.............................. AnSHCPU/AnACPU/AnUCPUQCPU-A (A
mode) Programming Manual
(Dedicated Instructions) IB-66251
3) SW -UTLP-PID
................................AnACPU/AnUCPU Programming Manual
(PID Control Instructions) IB66258
4) SW -SIMA
5) SW -UTLP-FDI Unusable
6) SW -SAPA