ROCKER ARMS AND CAMSHAFT
ENGINE OVERHAUL <4G63-Turbo>
11D-39
CAUTION
Do not use container C for cleaning. If cleaning is
performed in container C, foreign matter could
enter the pressure chamber when the chamber is
filled with diesel fuel.
7. Soak the lash adjuster in the diesel fuel in
container C. Gently push the internal steel ball
using the special tool Air bleed wire (MD998442).
8. Place the lash adjuster upright with the plunger at
the top. Push the plunger firmly until it makes a
full stroke, then return the plunger slowly and
release the hold of the steel ball to allow the
pressure chamber to be filled with diesel fuel.
9. Take the lash adjuster out of the container, place it
upright with the plunger at the top, and push the
plunger firmly. The plunger must not move at all.
NOTE: If the lash adjuster contracts, perform the
operations 7 through 9 again. Replace the lash
adjuster if it still contracts even after the pressure
chamber has completely been filled with diesel
fuel (air has been bled).
10.Keep the serviced lash adjusters in their upright
positions to prevent diesel fuel from spilling out.
Protect them from dust or other foreign matter.
Install the lash adjusters onto the engine as soon
as possible.
AK202841
Diesel fuel
MD998442
AB
AK202842
Diesel fuel
MD998442
AB
AK202843
Summary of Contents for 4g63
Page 68: ...NOTES ...