Mitsubishi 2015 OUTLANDER, Owner'S Manual

Page: 279 / 490

When you turn off the system, a buzzer
sound and, at the same time, the “FCM OFF”
message appears on the screen and the “FCM
OFF” indicator comes on.
Cycling the operation mode to ON will set
the FCM back ON.
To change alarm timing
Give a short press to the FCM ON/OFF
switch to change the timing at which the
frontal collision alarm is triggered. Every
time you press the switch, the alarm timing
changes alternately between “FAR” (earlier
alarming) and “NEAR” (later alarming).
As you make selection, the selected alarm
timing is displayed on the information screen
of the multi information display. Even after
turning off the FCM or setting the operation
mode to “OFF”, the system retains your last
selected alarm timing in memory.
When “NEAR” is selected
When “FAR” is selected
CAUTION
l For the FCM brake prefill, the FCM brake
assist and the FCM braking functions, the
function triggering timing cannot be
changed.
type approval number: POCC DE.ML05.H01162
Lane Departure Warning
(LDW)*
E00635701063
By recognizing through a camera (A) the lane
in which your vehicle is running, LDW gives
you warning when your vehicle is likely to
drift from its lane with an audible alarm and a
visual alarm displayed on the information
screen of the multi information display.
Lane Departure Warning (LDW)*
6-97
OGFE16E1
Starting and driving
6