Mitsubishi 2015 OUTLANDER, Owner'S Manual

Page: 278 / 490

CAUTION
• Do not cover the sensor mounted area
(shaded area as shown in the illustration)
with a sticker, licence plate or anything
such as a grill guard, etc.
*: Triangular projection
• The sensor front cover should not be
modified or painted.
• Avoid using different size tyres from
those specified and maintain even tyre
wear.
• Do not modify the suspension of your ve-
hicle.
CAUTION
l If the sensor mounted area of the vehicle is
deformed due to an accident or some other
causes, turn off the system and please con-
tact a MITSUBISHI MOTORS Authorized
Service Point.
NOTE
l A sound will be heard during the activation
of automatic braking, this is a function of the
brake control and is not abnormal.
FCM ON/OFF switch
E00635601118
This switch is used to turn on and off the
FCM and also to select your desired collision
alarm timing.
When the switch is held pressed, the
ON/OFF state of the FCM changes from ON
to OFF and vice versa. If you give the switch
a short press with the FCM in the ON state,
you can change the collision alarm timing.
To turn on/off the system
You can switch the system from OFF to ON
or ON to OFF if you hold the FCM ON/OFF
switch pressed when the operation mode is
set to “ON”.
Once the system is turned on, a buzzer
sounds, the information screen of the multi
information display shows the collision alarm
timing currently selected, and the “FCM
OFF” indicator on the screen goes out.
Forward Collision Mitigation System (FCM)*
6-96
OGFE16E1
Starting and driving
6