Mitsubishi 2015 OUTLANDER, Owner'S Manual

Page: 273 / 490

To activate cruise control (au-
tomatic speed control)
E00638500065
To activate cruise control (auto-
matic speed control)
If you hold the “ACC ON/OFF” switch
pressed with the ignition switch or operation
mode set to “ON” and the ACC in the ‘OFF
state’, the cruise control is activated. The in-
formation screen of the multi information
display then changes to the cruise control
screen and a buzzer sounds at the same time.
Cruise control is turned off if you set the ig-
nition switch or operation mode to “OFF”.
→ “Cruise control (automatic speed control
system)” on page 6-69
CAUTION
l Cruise control (automatic vehicle speed con-
trol system) does not alert by proximity
alarm and control distance between vehicles
to the vehicle in front.
type approval number: POCC DE.ML05.H01162
Forward Collision
Mitigation System (FCM)*
E00635101067
The FCM uses a sensor (A) to determine the
distance to a vehicle in front in the same lane
and its speed relative to your vehicle’s speed.
If the system judges that your vehicle is in
danger of colliding against the vehicle almost
straight from behind, it gives you visual and
audible alarms (Forward collision warning
function), increases the brake fluid pressure
(FCM brake prefill function), and also pro-
vides braking force assistance when you de-
press the brake pedal (FCM brake assist func-
tion) to avoid frontal collision.
When the risk of collision increases more, the
system causes the brakes to work moderately
to encourage you to apply brakes. If the sys-
tem judges that a potential collision is immi-
nent, it initiates emergency braking to miti-
gate collision-caused damages or to avoid
possible collision (FCM braking function).
Stop lamps are illuminated during automatic
braking.
Forward Collision Mitigation System (FCM)*
6-91
OGFE16E1
Starting and driving
6